10
Chapter 2
: Connecting an Antenna or Cable to Your TV/VCR
Antennas with two sets of leads
You might have two sets of leads from your antenna system, especially if
you have one antenna for VHF signals and one antenna for UHF signals.
If your antenna system has both a coaxial lead and twin 300-ohm
leads,
you must obtain a combiner (available at your local electronics
store). Press or screw the coaxial lead onto the combiner; place the
twin leads underneath the screws on the combiner and tighten the
screws. Press the cable from combiner onto the antenna terminal on
the back of the TV/VCR.
If your antenna system has two sets of twin 300-ohm leads,
you
must obtain a combiner (available at your local electronics store). Place
one set of twin leads underneath the screws on the combiner and tight-
en the screws. Do the same with the other set of twin leads. Press the
cable from the combiner onto the antenna terminal on the back of your
TV/VCR.
