TROUBLESHOOTING
CONDITION
Base Station does
not power on
Radio reception
is weak
Cannot change the
"PrivateTalk" CTCSS
sub-channel
Range is limited
Sound distortion
problems
SOLUTION
•
Check the power supply for proper
installation and connection.
•
If batteries are installed, make sure the
polarity matches the battery compartment
drawing. If batteries are weak, insert 4
fresh "AA" alkaline or rechargeable Ni-Cad
batteries, matching the polarity diagram
in the compartment.
•
Push the VOLUME UP (
I
) button to
increase base station volume.
•
The receiving signal may be weak or out of
range, if this happens push the MONITOR
(MON) button.
•
Press the FUNC button until the smaller
sub-channel digits flash on the LCD panel.
Push the CHANNEL UP (
I
) or DOWN (
J
)
button to change to the desired sub-channel,
then push the P-T-T button to save the
setting.
•
Batteries may be weak. View the battery
power icon on the LCD panel while
transmitting, and if displaying low battery
power, insert 4 fresh "AA" alkaline or
rechargeable Ni-Cad batteries into the
unit, matching polarity.
•
Best range is provided in open areas; using
the base station in buildings and other
structures may limit the range considerably.
•
Transmit by speaking in a normal voice,
no more than 18 inches away from the
base station's microphone. If you are
receiving, lower the volume setting.
16
