background image

WHEN THE MACHINE IS DELIVERED 

Check the carton carefully for signs of rough handling. Remove the machine from the carton. If the 

machine is damaged, notify the carrier IMMEDIATELY and request an inspection. Be sure to keep the 

carton, packing inserts, packing lists and carrier’s receipt until the inspector has verified your claim. 

 

CleanFreak’s liability ceases when the carrier picks up the shipment but our customer service staff will be 

glad to furnish any information needed in connection with the claim and will expedite repair of the 

machine.  

 

 

BEFORE OPERATING THE MACHINE 

Read the manual carefully and completely before attempting to operate the unit. This manual has 

important information for the use and safe operation of the machine. Keep this manual handy at all times. 

This machine will assure years of satisfactory service if operated and maintained according to 

recommendations in this manual. If additional information is needed, please contact your local distributor 

or write to: 

 

 

 

 

CleanFreak 

P.O. Box 569 

Wausau, WI 54402 

 

All information and specifications printed in the manual and parts list are current at the time of printing; 

however, because of CleanFreak’s policy of continual product development, we reserve the right to make 

changes at any time without notice.  

 

 

WARRANTY 

To protect your investment, promptly fill in the required information on the warranty card that comes with 

the unit and mail it back. 

 

 

          WARNING 

 

 

To reduce the risk of fire, electric shock, or injury: 

 

Do not operate the machine unless trained and authorized. 

 

Do not leave the machine when plugged in. Unplug from the outlet when not in use, before servicing, 

and when changing the brushes or pads.  

 

Use indoors only. 

 

Do not allow to be used as a toy. Close attention is necessary when used by or near children. 

 

Do not bypass or defeat the safety “lock-out lever.” 

 

The machine was designed for use as per instruction and recommendations written in this manual. Any 

deviation from its proper use or purpose and the consequential damage that may occur is the sole 

responsibility of the end user.  

 

Do not use with damaged cord or plug. If the machine is not working as it should, or it has been 

dropped, damaged, left outdoors or dropped into water, return it to an authorized service center.  

 

Do not pull or carry by cord, use cord as handle, close a door on the cord or pull cord around sharp 

edges or corners. Do not run machine over cord. Keep cord away from heated surfaces.  

     

Summary of Contents for SS-20-1500HS-TC











Reviews: