Fill the water tank:
1. Pull out the water tank.
2. Fill the water tank with cold and clean water. Make
sure that water level is between “Min”
minimum level and “Max” maximum level.
3. To increase the cool effect, insert the icebox in the water tank. Before use icebox, they
must be filled by water and put in the refrigerator until they are completely frozen.
4. Close the water tank.
Attention!
1. Making sure the power is cut off before filling or refilling the water.
2. Only use water in the water tank. Do not add any chemicals, oils or other additives.
3. Only use cold water in the water tank.
4.
Make sure the water level in the water tank is between “Min” level and “Max” level.
Place the unit on a firm level surface and connect to the power supply. Power indicator light
reminds this product in standby mode. Turn
on “
” button, default setting is in middle speed,
Turn it again, products in standby.
1. Speed key
: Select 3 fan speeds (Low, Middle, High).
2. Mode key
“
”: Default setting is in normal wind. Press the button to select normal wind,
natural wind, or sleep wind.
3. Swing key
: Swing indicator light is on when oscillating. Press again to turn off.
4. Timer key
: Set the timer from 0 to 8 hours.
5. Cooling key
: Press this key, if you add the freezing ice crystal box in the water tank, air
blow out temperature wills much more cooling. Press it again to cancel the function.
Remote control and panel display：
