6
PREPARATION
Place the product on a firm,
horizontal
surface and plug into a 120V 60Hz power outlet. Only
operate product in upright position.
OPERATION INSTRUCTIONS
Plug power cord into a standard grounded wall outlet and get it started.
Two Modes (Fan/Heater)
1. Switch the knob to set the fan or heat mode.
2. Select Fan mode.
Switch clockwise to the fan mode(marked as
blue
), and select “LO” (18W) or “
Hi
” (26W) to
adjust the fan power.
3. Select Heat mode.
Switch counterclockwise to the heat mode(marked as
red
), and select “LO” (750W) or “
Hi
”
MATS
Anti-dumping switch
