and the power indicator lights up, and it is in the maximum power output.
When pressing the
Power
button the fourth time, it will return to the P0 setting.
6.
The Remote Control Operation
(The remote control can be used to operate the
heater only when the main switch is turned on.)
①
Power Button
②
P1- Low Power Output Button
③
P2- High Power Output Button
④
Timer Button
When pressing the
Power
Button on the remote control, the panel displays P0, and
the heater is turned on, but there is no power output. At this time, the status of the
operation is to be received, so you can press
P1
Button or
P2
Button to select the
option of the power output. If you press
P1
once, then press
P1
again, and the
value on the display panel will not be displayed. Now the heater enters the standby
state. When the heater is working in P1 or P2, you can press the
Timer
Button to
select the time as desired. (The rest of the time is invalid if you have set the timer.)
The maximum timing is 12 hours.
