5
MAINTENANCE & STORAGE
Maintenance
1. Turn off the power switch in the rear of the unit when you are not using it.
2. Unplug the unit and let it cool completely before storage.
3. Clean your heater with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning,
dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater.
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water.
6. Wait until the unit is completely dry before use after cleaning.
Storage
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original
packaging to repack the unit.
Basic Troubleshooting
If the heater will not operate, please check the following before seeking repair advice:
1. Check if the power cord is plugged into an electrical outlet, if not, plug it in.
2. Check if electricity to the main power switch (in the back of the device) is working.
NOTE: In order for the heater to work properly, the desired temperature on the heater must be set a few
degrees higher than room temperature. If it does not seem to be heating, increase the required temperature
of the heater to engage the heating element.
