AMU-500 UNIVERSAL SWITCH
5
11. Clearing one transmitter code
1. Press the connect button for no more than 1 second. The LED indicator on the receiver will
flash slowly.
2. While the learn mode is active, send an ‘off’ signal with the Trust Smart home transmitter
whose transmission code you want to clear from the receiver’s memory.
3. The receiver will flash twice to confirm that the code has been cleared.
Repeat this procedure to unbind multiple transmitters or transmitter codes.
12. Clearing entire memory
1. Press the connect button (approx. 6 seconds) until the LED indicator starts flashing.
2. While the clear mode is active, press the connect button again for 1 second to confirm
that you want to clear the entire memory.
3. The receiver flashes twice to confirm that the memory has been cleared.
EN
Summary of Contents for START-LINE AMU-500
