TRUST COMPACT SCAN USB 19200
3
UK
3.2
Installation Fine Reader 4.0 Sprint
For the complete operation of the OCR function (Optical Character Recognition) of the scanner,
you need to install the application Fine Reader 4.0 Sprint. Fine Reader is a program to scan text
and to convert it to a text document. This can subsequently be processed in a word processing
program. A very detailed manual of the program can be found on the CD-ROM.
Follow the directions below for the installation:
1.
Follow steps 1 to 5 of chapter 3.1 once again to start the Trust Software Installer..
2.
Click on the ‘Fine Reader 4.0 Sprint’ to start the installation.
3.
Follow the instructions on the screen to complete the installation.
3.3
Installation Photo Express 3.0
Ulead Photo Express 3.0 is a drawing and processing program with a large number of options.
You can use this program to process photographs. A detailed instruction manual for this product
can be found on the CD-ROM.
Follow the directions below for the installation:
1.
Place the Ulead Photo Express 3.0 CD-ROM in your CD-ROM player.
2.
The installation screen of this program starts automatically. If this does not happen in
your case, go to ‘Start - Perform’ and type [D:\SETUP.EXE]. Then click on ‘OK’.
3.
Click in the menu on ‘Install’ to commence the installation.
4.
Follow the instructions on the screen.
5.
Restart your computer after the installation of Photo Express.
3.4
Connecting Compact Scan USB 19200 to your PC
Connect the scanner after installing the software.
A USB appliance is hot swappable. This means that the appliance can be connected to and
disconnected from your computer whilst this is switched on.
1.
Ensure that Windows has been started up.
2.
Connect the USB plug of the scanner to a free USB port of your computer.
3.
The new hardware is found and the scanner is automatically installed.
Your scanner is now ready for use.
4
Use of the Scanner
You can scan in two ways with the Trust Compact Scan USB 19200, namely via de Direct Scan
application (easiest) and via the TWAIN interface screen (more possibilities). The easiest way to
scan is described below:
1.
After the installation of the software, a ‘Direct Scan’ icon has appeared in the task beam
of Windows. Double click on this to start the Direct Scan application. See figure 2.
2.
Lay an image with the part to be scanned partially on the glass plate and close the lid.
3.
Click on one of the buttons of the Direct Scan application to scan the image and to send
it to the defined location.
4.
See the table below for the various buttons for the Direct Scan application:
