TRUST FAMILYC@M 500 FLASH
30
To take good photographs, the object should first be held in view for a couple of seconds before taking the
photograph.
5.2 Flash
The FAMILYC@M 500 FLASH has a flash. The flash can be set to three different modes using the button
I
(see figure 1).
OFF
:
Flash is OFF
:
Flash is on
AUTO :
The flash will work automatically
5.3
Recording video clips
You can record video clips in two different resolutions, i.e. High (1280x1024) and Low (640x480). Also see
figure 1 for the controls and figure 2 for the symbols used in the LCD screen.
1. Press the ON/OFF button (K) to turn the camera on. The LCD screen (G) will turn on and the camera will
be ready for use.
2. Press the MENU button (H). A film camera symbol (B) as shown in figure 2 will appear in the LCD
screen.
3. Press the exposure button (A) to start recording. The counter (J) on the LCD screen will increase during
the recording. This shows how many seconds have been recorded.
4. Press the exposure button (A) to stop recording. The counter (J) on the LCD screen will increase by 1.
5.4
Deleting the memory
When deleting the memory, a choice can be made to either delete all the photographs and video clips or to
only delete the last recording.
5.4.1 Deleting the last recording
1. Press the MENU button (H) three times until the symbol F appears (see figure 2).
2. Press the exposure button (A) to delete the last recording.
5.4.2 Deleting all the photographs and video clips
1. Press the MENU button (H) four times until the symbol G appears (see figure 2).
2. Press the exposure button (A) to delete all the recordings.