Trust Energy Protector 325, User Manual, Page: 12 / 20

8
Note
The computer interface connection is optional. The UPS also functions
without an interface connection.
3. Connecting to mains
Use the supplied AC power cord to connect the UPS to the
mains to power up the UPS (see figure 3: # 1).
4. Charging the battery
The UPS charges its battery whenever it is connected to the
mains. For best results, charge the battery for 4 hours when
you use the UPS for the first time.
5. Connecting devices
Use the supplied IEC cord to connect devices with the UPS
(see figure 3: # 2).
Plug the devices into the output connectors on the rear
panel of the UPS. If you want to use the UPS as a master
on/off switch, make sure that all the connected devices are
switched on.