TRUST BT210 BLUETOOTH HEADSET
5.2.2
Answering and ending a telephone conversation
Once a call is received, the status LED on the headset will start to flash. Press the
On/Off button (1, figure 1) to accept the call (see step 4 of the Quick Installation
Guide). Press the On/Off button again to end the call.
5.2.3
Altering the volume
Press the + button (2, figure 1) on the headset to increase the volume. Press the –
button (3, figure 1) on the headset to decrease the volume. See step 5 of the Quick
Installation Guide.
5.2.4
Turning off the microphone
To turn the microphone off during a conversation, press the + button (2, figure 1) and
the – button (3, figure 1) until two short beeps are heard. The microphone will then be
turned off. To turn the microphone back on, follow the procedure required to turn the
microphone off.
5.2.5
Making an automatic call
Note:
This option only works in combination with Sony Ericsson mobile
telephones.
Carry out the following to make an automatic call using voice recognition:
1.
Record your voice and link it to the desired telephone number stored
on your mobile telephone (see the instruction manual provided with
your mobile telephone).
2.
Turn on your headset as described in steps 2 and 3 of the Quick
Installation Guide.
3.
Press the On/Off button (1, figure 1) until a short, high pitched tone is
heard.
4.
You may then hear another signal (depends on the type of mobile
telephone).
5.
Speak the name of the person that you wish to call.
5.2.6
Turning the headset on and off
Press the headset’s On/Off button (1, figure 1) for a couple of seconds until the red
status LED starts to flash. The headset is now turned off. Follow the same procedure
to turn the headset on again.
4
