background image

1

APIR-2150 WIRELESS MOTION SENSOR

WIRELESS RADIO SIGNAL

•  The 433.92 MHz radio signal passes through walls, windows and doors. 

•  Indoor range: up to 30 m. Outdoor range: up to 70 m. (optimal conditions)

•  The range is strongly dependent on local conditions, such as the presence of metals. For example, 

the thin metal coating in Low-emissivity (Low-E) glass has a negative impact on the range of  

radio signals.

•  There may be restrictions on the use of this device outside the EU. If applicable, check whether this 

device complies with local directives.

REMARKS

•  Avoid combining this wireless motion sensor with Trust SmartHome dimmer receivers.

•  Keep in mind that external factors (cloudy or rainy weather, car headlights, street lights, etc.) can 

influence the observed light level.

•  Make sure the receivers that need to be controlled are within wireless range of the transmitter.

COMPATIBILITY

This transmitter works with all 

Trust SmartHome receivers.

FUNCTIONALITY

Outdoor motion sensor for switching 1 or more 

Trust SmartHome receivers on/off. Also compatible 

with the Trust SmartHome doorbell chime.

Read these simple guidelines. Not following them may be dangerous and faulty installation will 

invalidate any warranty that may apply to this product.

TECHNICAL SPECIFICATIONS

•  Batteries

•  RF frequency

•  RF range

•  Detection range

•  Horizontal detection angle

•  Vertical detection angle

•  Switch-off delays

•  Light level settings

2x 1,5 Volt AAA alkaline

433.92 MHz

Up to 30 m indoor/70 m outdoor (optimal conditions)

Up to 7 m

20° up to 110°

65°

4 (5 seconds, 1/5/10 minutes)

3 (High, Medium, Low)

EN

Summary of Contents for APIR-2150











Reviews: