TRUST 760 POWERC@M CCD
Standard mode
Distance: 130 cm to infinity.
Portrait mode
Distance: 80 – 130 cm
The macro symbol will be displayed in the bottom left-hand corner of the
LCD screen when this mode is selected using the lens ring.
Macro mode (for taking close-up photographs)
Distance: 18 - 25 cm
The macro symbol will be displayed in the bottom left-hand corner of the
LCD screen when this mode is selected using the lens ring.
Table 8: Macro options
Note:
It is recommended to use the stand and the automatic exposure
function (see chapter 10.3) when using the macro function.
10.3 Automatic
exposure
The camera has an automatic exposure function which gives a time delay of 10
seconds before the photograph is taken. You can use the automatic exposure
function to take a photograph of yourself.
The default setting when the camera is turned on is off. The automatic exposure
function can be turned on as follows.
1.
Set the camera to the ‘Capture’ mode.
2.
Press the control button upwards to select the automatic exposure function.
The symbol for the automatic exposure function will appear on the LCD
screen.
Press the exposure button (1, figure 1) to take a photograph using the automatic
exposure function.
Whilst counting down (10 seconds):
- A beep will be heard.
- The number of seconds remaining will be displayed on the LCD screen.
- The automatic exposure indicator (4, figure 2) will flash.
Note:
It is recommended to use the stand when taking a photograph
using the automatic exposure function.
10.4
Setting the flash
The camera has various flash options.
Selecting the flash:
1.
Set the camera to the ‘Capture’ mode.
2.
Press the control button downwards. Repeat this until the correct setting has
been reached (see Table 9).
Flash off.
Automatic flash.
The flash will work automatically when there is insufficient light.
10
