600VA UPS
– User’s Manual
3
Trouble Shooting
Problem
Possible Cause Solutions
Alarm continuously
Sounds.
The UPS is overloaded. Remove a connected device
(300W MAX).
UPS doesn’t work (both LED’s off)
The UPS was overloaded
UPS in off mode
1 Disconnect UPS from mains
2 Wait 5 seconds
3 Reconnect UPS to mains
4 Press circuit breaker.
Turn on UPS
Connect UPS to mains
Red LED flashing every 0.5
Seconds.
Alarm for over-temperatur
Protection
Ensure adequate ventilation.
Allow the UPS to cool down.
