UPGRADE
: Click
UPGRADE
to begin the upload process. This process may take up to
two minutes. After two minutes, log in again and check your new firmware version in the
System Status screen. If the upload was not successful, the following screen will appear.
Click Back to go back to the Firmware screen.
DO NOT power down the router or interrupt the firmware upgrading while
it is still in process. Improper operation could damage the router.
Warning
4.5.4 SysRestart
Click
SysRestart
with option
Current Settings
to reboot your router (and restore your last
saved configuration).
If you wish to restart the router using the factory default settings (for example, after a
firmware upgrade or if you have saved an incorrect configuration), select Factory Default
Settings to reset to factory default settings.
You may also reset your router to factory settings by holding the small Reset pinhole button
on the back of your router in for 10-12 seconds whilst the router is turned on.
50