TeleViewer
5
7. Connect plug (N) on the power cable to the keyboard connection on your
computer. Use the 5 pin DIN cable if you have an AT system and the 6 pin PS/2
cable if you have a PS/2 keyboard.
Tip:
You may use your mouse's PS/2 connection if the PS/2 power cable does
not fit on your system's PS/2 keyboard connection.
8. Connect your keyboard's plug (or your PS/2 mouse) to the (O) plug on the power
cable (see figure 1).
9. Connect the plug (M) to the plug (A) on the TeleViewer.
10. Connect your TV or video recorder to the desired video output on the TeleViewer.
You can choose from composite video (C), S-VHS (D) or RGB-video (E) (see
figure 1). Choose one of the connections given below.
Note:
Do not connect more than 1 cable to a TV at the same time if it supports
more than one connection.
•
Composite video:
a. Connect plug (R) on the composite video cable to connection (C) on the
TeleViewer (see figure 1).
b. Connect plug (S) to the composite video input on your TV or video recorder
(see figure 1).
•
S-VHS:
a. Connect plug (P) on the S-VHS cable to connection (D) on the TeleViewer
(see figure 1).
b. Connect plug (Q) to the S-VHS input on your TV or video recorder
(see figure 1).
•
RGB-video:
a. Connect plug (U) on the RGB-video cable to connection (E) on the TeleViewer
(see figure 1).
b. Connect plug (T) to the SCART input on your TV or video recorder
(see figure 1).
Note:
Not all TVs with SCART connections support RGB video. Read your
appliance's instruction manual before connecting the cable.
Tip:
If your TV or video recorder supports S-VHS or RGB-video, it is advisable
to use this to obtain the best picture quality.
