28
REPLACING UV BULB
1. The indicator will glow red when it is time to
replace the UV bulb.
2. Remove HEPA filter drum (Fig. A), and use a
screwdriver to remove the screw securing the UV
housing (Fig. I).
3. Gently remove the UV housing (Fig. J) and
disconnect the UV bulb from the socket (Fig. K).
4. Release carriage from the UV bulb (Fig. L).
5. Secure carriage to new UV bulb (on page 13)
(Fig. M) and connect UV bulb into purifier (Fig N).
6. Replace the UV housing and use a screwdriver to
tighten the fastening screw.
7. Once the purifier is powered-on, hold the Reset
button until the indicator turns white.
Fig. I
Fig. L
Fig. J
Fig. K
Fig. M
Fig. N
