Set up
Fig. 1)
Unscrew bottom cover and remove plastic bag from
filter
Fig. 2)
Secure filter on bottom cover and replace inside the
purifier
Fig. 3)
Plug-in your purifier and power on
Plug-in your SensorPod
TM
For optimal results, place SensorPod
TM
on tabletop or
counter across the room, within line sight of the purifier
Signal strength may vary by location
Room coverage up to 35 m²
Filter Replacement
Fig. 5
)
Filter type
Suggested Replacement / Cleaning
Item Number
A.
Washable Prefilter
Hand wash as needed with water
Not sold separately, see HEPA Drum Filter
B.
Carbon filter
Every 3-4 months*
2415106 (3-pack)
C.
HEPA Drum Filter
Every 12-15 months*
2415107 (includes A, B & C)
D.
UV Bulb
#
Every 2-3 years*
2415108
*Replacements indicator will glow red on control panel to notify you to change.
#
See Fig. 6) Use caution when using a screwdriver to remove the UV housing when replacing the UV-C emitter.
IMPORTANT:
Before operation of the purifier, follow the steps and
read our TruSens Owners Guide at: www.trusens.com/Z-2000
EN
Page 5
Control panel
Fig. 4)
Power on/off
Fan speed Auto/Whisper/1/2/Turbo
Dimmer on/off
Timer: 2h/4h/8h/12h
UV mode on/off
Carbon/HEPA/UV replacements
0 - 50, Blue / Good
50 - 100, Yellow / Moderate
100+, Red / Poor
SensorPod
TM
signal indicator
