Truper 101405, Manual

Page: 6 / 24

20V
20V
6
Parts
Start Up
Loading the Battery
ENGLISH
Handle
Belt clip
Direction of
rotation and
Blocking Button
LED
Light
Switch
Battery
Release
Button
Battery
Torque
Regulator
Function selection
collar
Speed
Selector
Key-less chuck
with retention
insurance
1
2
1
. Plug in the charger in a 127 V~(The green light of the
charging indicator turns on) power outlet.
2
. Insert the battery into the charger sliding it as shown in
the figure. The green light will turn off and the red light
should come on.
• When the battery is completely charged, the green light
will be on and the red light will be off.
• Disconnect the charger from the power once the charge
is completed.
• If the red light is blinking it signals a defective battery.
Replace with a new one.
• In case the green light is blinking it signal the
temperature in the battery is lower to 32 °F or higher than
113 °F. Wait until the battery temperature is in the
adequate level to be able to charge it.
Battery Level
Indicator
Battery
connection
teeth
Battery
charger
In model MAX-20RS,
battery and charger are sold
separately.
NOTE
Charge indicator
The cordless hammer drill is useful
both for drilling holes with impact
mode, as well as for screwing and
unscrewing