E465EN_04.DOC
Maintenance
21
5.1 Replacing carbon brushes
The motor comes to a standstill when the carbon brushes are worn
out.
¾
Have the carbon brushes checked and replaced as needed by
a trained technician.
Note
Only use original replacement parts and observe the specifications
on the type plate.
5.2 Changing the blade
Turning the moving cutter blade over or
replacing it
Danger
Possible lethal danger due to electric shock!
¾
Pull the plug out of the socket when carrying out tool changes
and before all maintenance work on the machine.
1. Position turning handle (27) to Stage "0" (ram in lower
position).
2. Loosen fixing screw (1s).
3. Rotate moving cutter blade (5s) by 180° and remount it (or
mount a new blade).
4. Screw in fixing screw (1s) and tighten it. (see Fig. 14844, Pg.
13).
Turning the fixed cutter blade over or
replacing it
1. Loosen fixing screw (1t).
2. Rotate fixed cutter blade (5t) by 180° and retighten the fixing
screw (1t).
Note
Observe cutting clearance.
