E518EN_04.DOC
Maintenance
11
5. Maintenance
Danger
Possible lethal danger due to electric shock!
¾
Pull the plug out of the socket when carrying out tool changes
and before all maintenance work on the machine.
Caution
Damage to property possible due to blunt tools!
Overloading of the machine.
¾
Check the cutting edge of the cutting tool hourly for wear.
Sharp blades provide good cutting performance and are
easier on the machine. Replace blades promptly.
Warning
Risk of possible injury due to improper repairs!
The machine does not function properly.
¾
Repairs should be carried out only by a trained specialist.
Note
Check tools hourly for wear.
Maintenance point
Procedure and time interval
Recommended lubricants
Order No.
Lubrication
agents
Moving cutter blade
Check hourly
-
-
Fixed cutter blade
Check hourly
-
-
Ram guide
Every 20 operating hours
Lubricating grease "G1"
0139440
Gearbox and
gear head (2)
After 300 operating hours, arrange
for a trained specialist to
relubricate or to replace the
lubricating grease
Lubricating grease "G1"
0139440
Fixed cutter blade
Turn over as needed
-
-
Fixed cutter blade
Replace as needed
-
-
Moving cutter blade
Turn over as needed
-
-
Moving cutter blade
Replace as needed
-
-
Ventilation slots
Clean as needed
-
-
Maintenance table
Tab. 5