2
omlox Satellite User Guide
2.
Safety and compliance information
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and receiver.
–
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
–
Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
this equipment may only be operated indoors. Operation outdoors is in violation of 47
U.S.C. 301 and could subject the operator to serious legal penal- ties.
CAUTION:
this equipment may only be operated as a fixed installation. Mobile operation is in
violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties.
CAUTION:
UWB devices may not be employed for the operation of toys. Operation onboard an
aircraft, a ship or a satellite is prohibited.
CAUTION:
Any changes or modifications not expressly approved by TRUMPF could void the user's
authority to operate this equipment.
omlox Satellites only operate (i.e. receive and transmit UWB signals) within a complete UWB real-
time location system TRUMPF RTLS, which must be professionally installed. The installed system is
configured to cover only the area inside the building, preventing omlox Satellites and other UWB
devices of the system
from emitting UWB signals outdoors. Contact your system administrator if you are unsure as to
the extent of coverage.
To comply with FCC RF Exposure requirements the device must be installed to assure a
minimum separation distance of 20 cm between the device and any human body during
normal operating conditions.
