manualshive.com logo in svg

Trumpf N 700-0, Operator'S Manual

Share
Download
Trumpf N 700-0 Operator'S Manual Download Page 18

18

Maintenance

E210EN_03.DOC

5.1  Changing the tool

Replace the tools when the punch and/or die are blunt and can no
longer be reground.

Disassembling the punch

 

1. Loosen clamping screw (36).

2. Rotate die carrier (7) by 45°.

3. Pull die carrier (7) out towards the bottom.

4. Remove punch (9) by rotating it.

Installing the punch

 

1. Lightly lubricate the square part of the punch and die carrier

bore hole with lubricating grease "S1" TRUMPF Order
No. 121486.

2. Ensure that penetration depth is correct.

Changing the die and the punch guide

1. To replace the die and the punch guide, unscrew the fixing

screws (4).

2. Clean support areas on the die carrier (7).

3. Take care to ensure that the replacement parts are clean.

4. Lubricate the guide surfaces of the punch guide with lubricating

grease "S1" TRUMPF Order No. 121486.

5. Screw the fastening screws tightly when mounting the die and

the punch guide. (Tightening torque 16.5 Nm) 
Use original screws only!

(see Fig. 9016, Pg. 16)

Summary of Contents for N 700-0























Reviews:

No comments

Brands by name

Popular brands

Load more brands