E620EN_00.DOC
Maintenance
19
Disassembling the punch
1. Pull handle (2) back.
2. Pull tool (6) out of the housing (1).
3. Remove punch (5).
Installing the punch
1. Lightly lubricate the punch (5) and the boring in the tool (6) with
lubricating grease "G1".
2. Hang the punch in the groove of the punch holder.
3. Align the cutting direction towards the front.
4. Insert tool (6) into the housing (1) with cutting direction facing
towards the front.
5. Slide handle (2) back; the tool (6) is kept in the housing.
Replacing the die
1. Push cover ring (7) upward out of slot.
2. Push out cylindrical pin (9) using a drift punch.
3. Pull off die (8) from the carrier pin and replace it with a new
die.
4. Set die on the carrier pin.
5. Mount cylindrical pin.
6. Slide the cover ring in the groove downwards.
Summary of Contents for N 200-4 Li
Page 1: ...Operator s manual N 200 4 Li Recharger CLi english...
Page 2: ......
