7
Declaration of conformity
1. Information about the manufacturer
Name:
Truma Gerätetechnik GmbH & Co. KG
Address:
Wernher-von-Braun-Str. 12, D-85640 Putzbrunn
2. Device identification
Model / Version :
Trumove S / T
manoeuvring aid
3. Complies with the requirements of the following
EC directives
3.1 R&TTE directive (1999/5/EC)
3.2 EMC directive (2004/108/EC)
3.3 Radio Interference in Vehicles 72/245/EEC
(with the supplements)
3.4 End of Life Vehicles (2000/53/EC)
and bears the type approval number e1 03 4473 and the CE
symbol.
Trumove S / T
Class 1,
frequency
868 MHz.
Countries:
AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU,
IE, IS, IT, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.
4. Basis of proof of conformity
EN300220-2:2006, EN300220-1:2006 (R&TTE art. 3.2),
EN301489-1:2005, EN301489-3:2002 (EMV art. 3.1b),
EN61000-4-2:2001, EN61000-4-3:2006, EN61000-4-6:2001,
EN55022:2003 (Class B), ISO 7637-2:2004, EN60950:2001,
2004/104/EG, 2005/83/EG, 2006/28/EG, 2006/42/EG,
2000/53/EG
5. Monitoring body
Federal Office for Motor Traffic
6. Signatory details
Signature: Mathias Venschott
Head of product centre climate and
manoeuvring systems
Putzbrunn, 22.04.2013
Manufacturer’s terms of warranty
1. Case of warranty
The manufacturer grants a warranty for malfunctions in the
appliance which are based on material or production faults.
In addition to this, the statutory warranty claims against the
seller remain valid.
A claim under warranty shall not apply
– for parts subject to wear and in cases of natural wear and
tear,
– as a result of using parts that are not original Truma parts in
the units,
– as a consequence of failure to respect Truma instructions
for installation and use,
– as a consequence of improper handling,
– as a consequence of improper transport packing.
2. Scope of warranty
The warranty is valid for malfunctions as stated under item 1,
which occur within 60 months after conclusion of the pur-
chase agreement between the seller and the final consumer.
The manufacturers will make good such defects by subse-
quent fulfilment, i.e. at their discretion either by repair or
replacement. In the event of manufacturers providing service
under warranty, the term of the warranty shall not re-com-
mence anew with regard to the repaired or replaced parts;
rather, the old warranty period shall continue to run. More
extensive claims, in particular claims for compensatory dam-
ages by purchasers or third parties, shall be excluded. This
does not affect the rules of the product liability law.
The manufacturer shall bear the cost of employing the Truma
customer service for the removal of a malfunction under war-
ranty – in particular transportation costs, job and material
costs, as long as the service is carried out by an authorised
Truma Dealer.
Additional costs based on complicated removal and installa-
tion conditions of the appliance (e.g. removal of furniture or
parts of the vehicle body) do not come under warranty.
Rollers carry 60 months warranty against manufacturing de-
fects. Take care to remove sharp stones from your tyres prior
to using your Mover®.
3. Making a claim under the warranty
The distributor‘s address is:
Truma UK Limited
2000 Park Lane, Dove Valley Park
Foston
South Derbyshire DE65 5BG.
Complaints must be specified. Please also specify the device
serial number and date of purchase.
In order to allow the manufacturer to check whether it is a
warranty case, the end consumer must take or send the de-
vice to the manufacturer at his own risk.
In instances of the device being sent to the works, dispatch is
to be effected by freight transport. In cases under warranty,
the works shall bear the transport costs or the costs of deliv-
ery and return. If the damage is deemed not to be a warranty
case, the manufacturer shall notify the customer and shall
specify repair costs which shall not be borne by the manufac-
turer; in this case, the customer shall also bear the shipping
costs.
