12
EN
The gas hose and gas cylinder must be connected.
– Turn off all consumers.
– Open stop valves and, if present, the gas remote switch.
– Use the Torx T20 (10) from the screw aid (9) to turn the reset button
clockwise to the “
not
ready for operation” position.
– Remove the screw cap (8) from the test connection and connect
the test pump with test hose to the test connection.
8
8
Figure 3a
Figure 3b
DuoControl vertical
DuoControl horizontal
– Check for leaks (e.g in Germany in accordance with G 607).
– If there is a gas system leak, close the cylinder valves, have the
gas system repaired by an expert immediately and do not open the
valves in the meantime.
– Unscrew the pump from the test connection and screw the
screw cap (8) back onto the test connection.
