10
Carrying out the decalcification
process
Damage to circulation pump (10)
if it runs dry.
Make sure that the circulation
pump (10) is immersed before you switch on
the power (see Figure 6).
• Remove the socket (4) from the control pan-
el (7) of the AquaGo and connect it with the
plug (5).
• Run the circulation pump (10) for 2 hours un-
der supervision.
Figure 7
Cleaning the circulation pump
• Remove the socket (4) from the plug (5).
• Dispose of the remaining decalcification
product in accordance with the statutory
regulations of the respective country in
which it is used.
• Place the circulation pump (10) and the out-
let hose (2) in a bucket with drinking water.
• Connect the socket (4) and the plug (5).
Run the circulation pump (10) for about
5 minutes.
• Unplug the socket (4) from the plug (5) and
remove the circulation pump (10) from the
bucket.
