CAMERA MODULE
CM8257-A200SF-E
Version :0.1
November3, 2010
TRULY OPTO-ELECTRONICS LTD..
P.11
8
Gold finger
No dust, fingerprint, and not allows to
turning colors, burned, unsmoothed and
peeled; No open circuit or short circuit;
The defect width shall be smaller than 20%
of gold finger
’
s width. No copper/nickel
exposed in defect. Numbers of defected pin
shall be less than 3. The defect
limitation:width
≤
0.08mm,length
≤
5mm.
A
9
Stiffener
Holder anchor pole length overtopping the
steel plate shall be less than 0.2mm. No
dust, rust and deep scratch on the steel
surface without Double coated tapes.
B
10
Double coated tapes
Adhered direction shall be right. Not allows
to excess steel plate edge. No alveoli and
stick. Not allows to peel glue and rip
protective paper when tear the protective
paper.
B
11
Protective film
No dust in the glue side. Not allows to float
or drop. Adhered direction shall be right.
B
Remark:
1. The definition of the appearance importance class
A
：
The defect can be found in the finished product, or have obvious visual differences from
good products, such as crack, defect and dust, or influence image quality, or are appointed
by the customer. We will emphasize these items and check all products.
B
：
The defect can be found in the finished product and has visual difference from the good one,
but will not affect customer
’
s aesthetic judgement. Or the defect can not be found in the
finished product and will not generate functional problem, but will slightly influence
sequential manufacture process or condition. We will supervise these items in the
manufacturing process and check products selectively.
2. Sampling standard
Referenced standard: GB/T 2828.1-2003/ISO 2859-1:1999 and ANSI/ASQC.4-1993
Ⅱ