Unit 41, Amos Road, Meadowhall, Sheffield, S9 1BX
Ph +44 (0)114 2618 100 Fax +44 (0)114 2610 074 E-mail:
XST-101 V1 2/1/20
Sitting
The user should manoeuvre themselves to a position where they can feel the chair/bed
behind their legs,
the user should place the crutches into the ‘H’ position (see diagram) for
stability, they should then reach behind and feel for the chair handle or mattress whilst
maintaining balance with the crutches in the other hand, in a slow and controlled manner
(you may need to lean forward slightly), the user should lower themselves into a seating
position.
Standing
Place the crutches in the crutches into
the ‘H’ position (see diagram) and place a hand over the handles of
the crutches for stability, lean forward whilst pushing on the chair handle/mattress and crutches to move
into a standing position. Once standing, place each hand through the cuffs of the crutches and hold the
handles facing forwards.
Safety in use
•
Always use crutches as advised by the issuer.
•
Avoid wet and uneven floors.
•
Remove loose rugs and obstacles before using the device.
•
Use the device in good lighting conditions and wear supportive footwear.
•
When using the device outdoors be cautious of loose surfaces and Icy conditions.
•
Always use chairs with arms, preferably high seat chairs.
•
Do not use the device if you suspect that it is damaged or faulty.
•
Do not store in sub-zero temperatures.
•
Crutches are matching pairs, do not use a mismatched pair.
Regular checks
•
Check the rubber feet have plenty of tread showing and are not unevenly worn.
•
Check handgrips/cuffs are in good condition and secure with no signs of damage or cracks.
•
Check the spring clips are fully protruding through the adjustment holes.
•
Check the adjustment holes for distortion, these should be round, not oval.
•
Check the tubing is not cracked or bent.
•
Check handgrip angle adjustment and attachment bolts are tight. (Trough/Gutter crutches)
STOP USING THE DEVICE IF YOU DISCOVER ANY LOOSE/WORN/DAMAGED PARTS
ONLY USE TRULIFE APPROVED REPLACEMENTS
REPORT ALL DEFECTS TO THE MANUFACTURER
Maintenance
Ensure that the device is cleaned on a regular basis using a mild detergent and warm water.
•
DO NOT USE BLEACH OR SOLVENTS
Disposal
Dispose of end of life products in accordance with local authority requirements.
AN ASSESSMENT TO BE CARRIED OUT ON THE USER TO ENSURE THE DEVICE IS SUITABLE PRIOR TO ISSUE
