MOUNTING
4K CELLULAR CAMERA
INSTALLATION GUIDE
CONNECT CAMERA TO CONTROL BOX
TrueLook, Inc. | 833.878.3566 | www.TrueLook.com
POLE MOUNTING
The camera and control box ship with pole mounting
brackets already attached. You may use the included straps to secure the
unit to a pole or similar structure.
WALL MOUNTING
The equipment may also be mounted to a flat surface
such as a wall by removing the pre-attached pole mount. To do so,
remove the camera from the base using the included Torx key, then
loosen the four screws securing the base to the mounting plate. This will
let you access the screws to remove the mounting plate from the pole
mount (requires T20 Torx driver, not included). Attach the mounting plate
to a wall or other flat surface, reattach the base, then secure the camera
to the base. We strongly recommend that only hand tools, no power
tools, be used when mounting or adjusting the camera.
AIMING
Use the included Torx key to aim your camera as desired.
FINAL PREPARATION
Make sure you remove the plastic cover from the
camera lens before use.
Connect the camera to the control box by plugging in the ethernet
cable coming from the TrueLook camera. The connector should snap
firmly in place.
WALL MOUNTING EXPLODED DIAGRAM
NETWORK CABLE COUPLER
TO POWER SUPPLY
TO CAMERA
BASE
MOUNTING
PLATE
CONNECT CONTROL BOX TO POWER
Plug in the control box to a standard 120VAC power supply. The power
indicator light should turn on. Your camera will come online automatically
within 5 minutes at the links/logins provided on the reverse of this page.
SUPPORT
Your purchase of this TrueLook system includes customer and technical
support. If you have any questions regarding the use or configuration of
this equipment and software, please don’t hesitate to contact us.
PHONE
866.811.2321
