3
CONNECTING A MOBILE DEVICE:
You can control the TrueLife Air Purifier P5 WiFi using a mobile device.
Download and install the
Tuya Smart
app.
Use the app to pair the purifier with your smartphone. Follow the app‘s
instructions to continue.
Detailed video instructions on how to pair the air purifier with your
mobile device can be found here:
https://www.truelife.eu/videos/air_purifier_px_wifi/
USING THE AIR PURIFIER:
Power button
–
This is used to turn the purifier on and off. When pressed, the purifier automatical-
ly starts in smart mode.
Timer and filter reset button
–
The timer can be set from 1 to 8 hours. Each time you press the button, it increases
the operating time by 1 hour. After the set operating time has elapsed, the air
purifier automatically switches off .
–
The filter icon will flash when the filter needs to be replaced (filter replacement is
described below). After it has been replaced, hold down the button for 3 seconds.
The icon will stop flashing and the filter reset is complete.
UV light button
–
The UV light button turns ultraviolet radiation on or off.
Ionization button
–
The air purifier automatically turns on the air ionizer. You can turn it off or on again
in the application.
Fan speed button
–
Three fan speeds can be set on the air purifier: low, medium and high. Use the fan
speed button to toggle between these speeds or set smart or sleep mode.
Note: When switched on, the purifier automatically starts in smart mode.
Smart mode
–
In smart mode, the purifier regulates the fan speed according to environmental
pollution. This means you do not have to set the speed manually; the air purifier
will automatically adjust it for you.
Sleep mode
–
In sleep mode, the fan operates at a low speed. All lights and backlights are
switched off or dimmed to a minimum.
WiFi button
–
To pair with a mobile device for the first time, hold down the WiFi button for 3
seconds. When the button starts flashing, the air purifier is ready for pairing. To
pair, follow the instructions in the app.
Child lock
–
To lock the control panel, hold down the UV light button and the WiFi button at
the same time for 3 seconds.
–
To unlock the control panel, again hold down the UV light button and the WiFi
button at the same time.
