5
To remove the nozzle from the handle, press and hold the nozzle release button and
pull the nozzle out.
The nozzles can be swivelled 360°.
The box includes the following nozzles:
−
Standard Jet
– used to rinse hard-to-reach areas and places where a conven-
tional toothbrush cannot reach.
−
Orthodontic Jet
– a special orthodontic nozzle designed to clean and rinse
hard-to-reach areas around braces.
−
Periodontal Jet
– directs the stream of water or mouthwash below the gum
line thanks to the tapered silicone end.
−
Dental Plaque Jet
– used for more effective removal of dental plaque with
easier access to affected areas.
Note:
Only insert and remove the nozzles when the flosser is switched off.
Note:
Nozzles are subject to personal hygiene and are not subject to warranty.
MAINTENANCE
Use only water and neutral detergents for maintenance purposes. Never use caus-
tic or abrasive cleaners as they can damage the equipment. Do not use water at
temperatures above 50 °C. Keep the equipment away from high temperatures and
avoid direct sunlight.
1. Base
Remove dirt by wiping it down with a towel or cloth with liquid soap and water. Then
wipe it dry. Do not immerse the device in water.
2. Water reservoir
Wash the reservoir with water and wipe with a dry cloth.
Dry the reservoir thoroughly if you are not going to use it for a long time.
After using a special product in the reservoir (mouthwash), rinse the reservoir each
time. Partially fill the reservoir with clean warm water, direct the nozzle into the sink,
turn on and let it flow until the reservoir is completely empty. Regular flushing pre-
vents clogging and prolongs the life of the product.
3. Nozzles
Wash the nozzle with water and wipe with a cloth.
