TrueConf Group, User Manual

Page: 18 / 32

4. Working with the endpoint
Outside a video session, the endpoint can have one of the following statuses:
Put into
⁠
sleep mode
Displaying
⁠
main screen with selfview
Playing content from ⁠ HDMI sources
Any incoming video call disables this status of the endpoint.
4.1. How to call another endpoint/device
Tip
It is convenient to use the ⁠ address book to call frequently used numbers.
1. In the
⁠
main menu choose
⁠
Dial (or press the button
⁠
on the remote control ).
2. Enter the address of the device you want to call and choose the call protocol (S IP or H.323) in the
list on the left.
3. Press
⁠
Dial on the screen or
⁠
on the remote control .
Then you can call the same device using the
⁠
call history .
4.1.1. Call a user or TrueConf conference
To call a TrueConf Server user, use one of the following formats:
<TrueConf_ID>@<server>
<TrueConf_ID>@<server>:<port>
where:
<TrueConf_ID>
: User's ⁠ TrueConf ID
<server>
: server IP address or name that you need to call
<port>
: Connection port (if it differs from standard
5060
for S IP and
1720
for H.323). Read
more about SIP/H.323 connection settings on TrueConf Server in
⁠
documentation .
For example:
james78@video.company.com
james78@video.company.com:5070
To join to a video conference on TrueConf Server, use a call string in one of the following formats:
00<Conference_ID>@<server>
00<Conference_ID>@<server>:<port>
<Conference_ID>@<server>
<Conference_ID>@<server>:<port>
, where:
<Conference_ID>
: ⁠ Conference ID
<server>
: Server IP address or name
<port>
: Connection port (if different from the standard one)
For example:
TrueConf Group User guide
© 2021 TrueConf. All rights reserved. 18