3
Preparation for Using
1. Open the package box, Please check the accessories: Receiver box*1, adaptor*1, 3229
device Antenna*3, 3288device antenna*4, USB transmitter*1~4pcs
2. Before using: Please install antennas into the main unit, connect the main unit and display
equipment with HDMI cable or VGA cable (3288), plug the power adapter and power on to start
the device, the red light is always on means the power on, wait 15-20 seconds, and then enter
the system standby screen;
3. As shown in the following photo: the default resolution of screen is 1080p, and the main
interface is from top to bottom, from left to right:
Hotspot and password, host IP address, device name and device password, display code,Setting
icon in the upper right corner (gear shape),and the application icon below.
4. Set up the device, you need prepare a USB mouse,and insert the mouse into any USB port.
Left click for confirmation, right click for return.
5. Long press one of the two App icons in the lower right corner of the main interface, and an
application list will pop up. Select system settings. After the application is successfully
switched,the main interface will show as below:
USB Transmitter Casting
1.
Connect USB transmitter to USB port of the computer for transmission (when the user uses
the transmitter of computer first time, you should do steps as below: go to the computer -
removable storage - double click CD drive: usbdisplay), and then the transmission application
will run automatically. Note that the win10 system need turn off the firewall (Windows Defender).
The driver is as below: