PRECISION 8i
OPERATION MANUAL
19
repaired or replaced at the manufacturer’
s option, free of charge. Supplementary
shipping charges will apply to units returned to addresses outside the continental USA.
All units returned to SUNRISE or authorized
TRUE systems
repair facility must be
prepaid
,
insured and properly packaged
. Purchaser must obtain a Return
Authorization (RA) number from SUNRISE prior to returning a product. SUNRISE may
require proof of the purchase date in the form of a copy of a dated original retail invoice.
This warranty is void if, in the sole judgment of SUNRISE, the product has been
abused, neglected, misapplied, or has been damaged by an accident, modification, or
attempted repair by unauthorized personnel. This warranty will not apply to cosmetic
damage incurred due to normal handling and use. SUNRISE reserves the right to
change or improve the product design at any time without prior notice. Incorporation of
design changes in future versions of the product does not imply the availability of
upgrades for existing units.
This warranty is in lieu of all other warranties, expressed or implied, and SUNRISE
specifically disclaims all implied warranties, including, but not limited to, warranties of
merchantability and fitness for a particular purpose. The purchaser acknowledges and
agrees that in no event shall SUNRISE be held liable for any special, indirect, incidental
or consequential damage, or for injury, loss or damage sustained by any person or
property, that may result from the use of, or failure of this product to operate correctly at
any time. In the USA, some states do not allow the exclusion or limitation of implied
warranties or liability for incidental or consequential damage, so the previous exclusion
may not apply to you. This warranty gives you specific legal rights, and you may have
other rights which vary from state to state.
SERVICE INFORMATION
Other than cleaning the exterior surfaces of your
PRECISION 8i
and occasional
inspection of the AC power cord and audio cables for damage, no maintenance
procedures should be attempted by the user. Cleaning can be performed using a lint-
free cloth dampened with Windex
.
There are no user-serviceable components inside the product enclosure. Many of the
electronic components are selected and matched at the factory. For this reason, as well
as personal safety considerations, we recommend that you refer service requirements
to
TRUE Systems
or authorized repair facilities.
All units returned to
TRUE systems
or authorized
TRUE systems
repair facility must
be
prepaid
,
insured and properly packaged
. Purchaser must obtain a Return
Authorization (RA) number from SUNRISE prior to returning a product.
Sunrise Engineering and Design Inc.
Tel: +1 520-721-2735
1634 S. Research Loop, Suite 110
Fax: +1 520-722-4057
Tucson, Arizona 85710 USA
Email: [email protected]
