First, place the slot in the plate over
the stop peg, then rotate the arm
down to line up the axle housings.
1. To assemble the press arm, lift the
arm so that the stop peg fits into
the slot in the adjustment plate (as
shown). Then rotate the arm down
to line up the axle housings.
2. Insert the axle from either side of
the machine. You may need a
rubber mallet to install the axle.
3. After the axle is installed, tighten
the four set screws on the press
arm assembly.
4. Make sure arm can adjust easily.
TO INSTALL ARM
Tighten the four
set screws after
installation.
Installation may
require two people.
S
TEP
3: A
SSEMBLE
THE
P
RESS
A
RM
Strength
MP 2.0 & 2.5
True Fitness Technology • O’Fallon, MO • Phone: 800-426-6570/636-272-7100 • Tr
uefi
tness.com
Page # 17 of 47
