CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
STEP 4 Handlebar Stem:
a
) Insert the Handlebar Stem (20) into
Frame tube then tighten the lock lever
(18) to secure it.
NOTE
: It may be necessary to lean the
bike forward to install the handlebar
stem.
STEP 5 Handlebar:
a
) Remove the screw (14) from the
Handlebar Stem slider and assemble
handlebar (11) onto stem slider.
b
) Slide the handlebar backward and re-
install the screw (14) into the Handlebar
Stem slider.
c
) Slide the Handlebar into the desired
position and use the lock lever (12) to
secure it.
STEP 6 Seat Post:
a
) Insert the Seat Post (15) into the bike
frame tube and adjust height until it is at
an appropriate position
then use the
lock lever (18) to secure it.
b
) Attach lock lever to the saddle slider
set.
c
) Slide the Seat slider on to seat post
until reach the desired position is
reached and use the lock lever to secure
it.
NOTE
: It may be necessary to lean the
bike backward to install the seat post.
Truefitness.com / 800.426.6570 / 636.272.7100
5
