............ www.truemfg.com ............
True Food Service Equipment, Inc.
13
13
TRUE TR, TA, and TG cabinets are available with four
different shelving / tray slide options.
Type Kit #1. Angle Type Tray Slide
Type Kit #2. Rod Style Tray Slide
Type Kit #3. Universal Tray Slide
Type Kit #4. Chrome Shelves & Shelf Supports
Required Tools:
• Standard Screwdriver (Flathead)
• Rubber / Plastic Mallet
• Tape Measure
Installation Procedures (Wire Shelves):
Chrome, Stainless, or PVC coated wire shelves come with
knob style shelf supports (image 1) and plastic plugs
(image 3). Note that heated cabinets use shelf standards
(see page 13).
Screw in the knob style shelf supports in the desired
height (remember all supports will need to be installed at the
same height to keep the shelf level.
Once the shelves are installed plug the remaining thread-
ed holes with the plastic plugs provided (see image 3).
PILASTER INSTALLATION & OPERATION
Type Kit #4 Chrome Shelves or PVC Coated Shelves
Pilaster Installation
(Side Wall of
Cabinet)
Pilaster Installation
(Back Wall of
Cabinet / Two &
Three Door Models)
Pilaster Installation
Two and Three Door
Models
(Middle of Wall in
Rear of Cabinet)
White plastic
plugs go into
the threaded
holes when
they are not
used by the
different shelving
systems.
(Not available
in heated
cabinets.)
NOTE: The package containing the pilasters will have the same serial number as cooler.
Please check to make sure these serial numbers are the same. Please see pages 14-15
on shelving diagrams for your specific model.
1
4
5
6
2
3
INSTALLATION / OPERATION INSTRUCTIONS
