True Manufacturing Company TCGR-50 Installation Manual Download Page 1

............ www.truemfg.com ............

INSTALLATION MANUAL FOR 

TCGR DISPLAY CASES (REFRIGERATED BAKERY & COLD DELI) MODELS

CURVED GLASS DISPLAY CASES 

- REFRIGERATED BAKERY & COLD DELI - 

CONGRATULATIONS!   

You have just purchased the finest commercial 

refrigeration available.  You can expect many years 

of trouble-free operation.

TRUE FOOD SERVICE EQUIPMENT, INC.

2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366

(636)-240-2400 • FAX (636)272-2408 • INT’L FAX (636)272-7546 • (800)325-6152

Parts Department (800)424-TRUE • Parts Department FAX# (636)272-9471

TABLE OF CONTENTS

Safety Information

Safety Precautions   –––––––––––––––––––––––  1
Proper Disposal  ––––––––––––––––––––––––––  2
Connecting Electricity  –––––––––––––––––––––  3
Adapter Plugs   –––––––––––––––––––––––––––  3

Installation / Operation Instructions

Ownership   ––––––––––––––––––––––––––––––  4
Required Tools  –––––––––––––––––––––––––––  4
Uncrating  –––––––––––––––––––––––––––––––  4
Locating  ––––––––––––––––––––––––––––––––  5 
Leveling Cabinet  –––––––––––––––––––––––––  5
Electrical Instructions  –––––––––––––––––––––  6
Wire Gauge Chart   ––––––––––––––––––––––––  7
Start-up   ––––––––––––––––––––––––––––––––  8
Shelving Installation  –––––––––––––––––––– 9-10
Installing Optional Castors  ––––––––––––––––  11
Installing Optional Formica Kit  –––––––––––––  12

Maintenance, Care & Cleaning

Optional Sealing Cabinet To Floor   ––––––––––  13
Cabinet Cleaning  ––––––––––––––––––––––––  13
Light Bulb Replacement   ––––––––––––––––––  14
Temperature Control Adjustment   –––––––––––  15
Cleaning The Condenser  ––––––––––––––––––  16
Important Warranty Information  ––––––––––––  17
Stainless Steel Equipment Care and 
Cleaning ––––––––––––––––––––––––––––– 18-19
Warranty (U.S.A. and Canada ONLY!)   –––––––  20

TCGR-77

TCGR-50

TCGR-50-CD

11/18/08 500 SB #912628

*Spanish, German, French, and Dutch versions included.

Summary of Contents for TCGR-50























Reviews: