True Heading AIS-CTRX CARBON, Operation & Installation Manual

Page: 34 / 58

AIS-CTRX CARBON Class B AIS Transponder Manual
1.1E 34 CTRX CARBON Manual
PRO AIS uses Microsoft .Net Framework V2.0. This means that the program is
updated and installed automatically if it does not already exist.
INSTALLATION
1. Insert installation CD and find the file ‖Setup.exe‖.
2. Double- click on the file ‖Setup.exe‖ and start the installation.
3. Follow directions to install .Net framework if so required
4. Once the security alert below appears, select ‖Install‖/‖Installera‖
5. PRO AIS will be installed and launch automatically.
6. A Start Menu folder will be created with the name ‖proAIS‖.
Figure 14 Installation of proAIS software for monitoring of AIS-CTRX CARBON.
INSTALLATION OF ProAIS from the computer
ProAIS software can be removed at any time by using ‖Add or Remove Programs‖
under the Control Panel.
Connect proAIS to your AIS-CTRX CARBON
In order to begin using a version of PRO AIS with the transponder , the AIS-CTRX
CARBON must receive 12 V DC power and the serial cable with the 9 poled d-sub
contact be connected to a PC where PRO AIS software is installed. If you do not
have a serial port on your computer a serial- to USB converter must be used
according to the above (see Page 22-23).
When you start the proAIS application, you will to need connect the computer to your
AIS-CTRX CARBON by choosing the correct communication port where AIS-CTRX
CARBON is connected by choosing ‖
Select serial port ‖ and then clicking the icon
‖ Connect ‖ in the dropdown menu. The computer then connects to the transponder
and programmed data will be become visible in the ‖ Static data ‖ field, shown by
default.