CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
19
BIKE ASSEMBLY STEPS (continued):
Step #11 Storage Tray:
•
Insert the Storage Tray on top of the Front
Mast Mounting Plate; pay special attention to
make sure that the plastic lip of the Storage
Tray is tucked underneath the bottom of the
Console
•
Attach the Storage Tray to the Mounting
Plate by tightening all 4 screw with a Phillips
head screwdriver (not provided)
Step #12 Console Covers:
•
For all hardware, tighten using a Phillips
head screwdriver (not provided)
•
Attach the Front Cover (P13) to the Front
Mast tube using a single (X06) fastener;
pay special attention to make sure the
Front Cover (P13) aligns with the Storage
Tray plastic around the Handlebar
•
Align the Back Cover (P22) with the Front
Cover (P13) such that the plastic seams fit
together
•
Attach the Back Cover (P22) to the
Console Mounting Plate using two (X47)
fasteners; top fastener hole locations
•
Attach the Back Cover (P22) to the Front
Cover (P13) using two (X05) fasteners; the
longer fasteners
•
Attach the Back Cover (P22) to the Front
Mast tube using the remaining single (X06)
fastener
NOTE:
•
TOP
Location =
SHORT
Screws (X47)
•
MIDDLE
Location =
LONG
Screws (X05)
•
BOTTOM
Location =
MEDIUM
Screws (X06)
