BEFORE FIRST TIME USE
•
Remove and safely discard the protective cover to prevent choking
hazard for children.
•
Unwind and straighten the cord.
•
To avoid blowing the electrical outlet, it is recommended that no other
appliances are plugged in the same outlet as your steamer during use.
ASSEMBLING/OPERATING YOUR GARMENT STEAMER
1.
Press the water tank release button, pull out the water tank, and fill water
into the water tank until it reaches MAX level. Do not fill the water tank past
the MAX indicator line. Place the water tank back into the body of the unit.
2.
Fabric brush can be attached by snapping on to the steamer nozzle and will
lock into position with a “click”.
3.
Connect the power cord to compatible electrical outlet and press the power
button. The power indicator light will flash indicating preheating. Once the
indicator light stops flashing, the steamer is ready for use.
4.
After use, press the power button to turn off the steamer. When the power is
off, the light will be off.
5.
The automatic safety feature on this steamer protects the unit by turning off
the control circuit after 8 minutes of no usage.
HOW TO STEAM
1.
Hang your garment or fabric.
2.
Turn on your steamer and allow 2-3 minutes for steam to come out.
3.
Steam control button controls steam flow when triggered.
4.
For continuous steam, hold down the steam control button and slide down
to lock in place.
5.
If using steamer with fabric/lint brush, ensure the steamer is turned off and
cooled down completely before attaching the brush to the steamer nozzle
to avoid scalding. Fabric/lint brush can be attached by snapping on to the
steamer nozzle and will lock into position with a “click”. Gently press the
fabric/lint brush against the garment’s wrinkles/creases, moving your arm
in an up and down motion.
INSTRUCTIONS FOR USE
Summary of Contents for HS-26
Page 8: ......
