2.2 Main Unit Installation
www.TruckX.com
1. Connect the power cable (Red) of the device to B+, ACC, and GND in the
fuse box on the vehicle.
2.Route the power cable along the A pillar of the vehicle to the upper
center of the front windshield. The red dashed line ( ) in the figure is
for reference
3. Select a proper installation position and wipe the position clean.
Remove the protective film from the 3M tape of the mounting base and
attach it to the position.
4. Mount the device to the base and connect its power cable correctly
(See 4 for reference). Then fasten the cable securely.