It is the policy of TRUAUDIO to continuously incorporate improvements into our products. All specifications are subject to
change without notice. If you have any questions regarding this or any other TRUAUDIO products, please visit
www.TruAudio.com or contact us:
Office: 1-888-858-1555, Monday-Friday 7 am - 6 pm MST.
Fax: 435-251-9815
Email: [email protected]
TruAudio
198 N Old Highway 91
Hurricane, UT 84737 USA
Using the (optional) TV Mount
Refer
to
the
instructions
included
with
the
SB-CUSTOM-TVB when mounting the custom length
soundbar to a TV directly.
Wiring the Soundbar
The magnetized cover panel on the front of the soundbar
hides a 6-conductor Phoenix connector. To wire the
soundbar, remove the cover panel and pass the speaker
wires through to the front of the soundbar. Remove the
unterminated Phoenix connector and terminate the
speaker wires according to the markings on the Phoenix
connector, making sure to keep the polarity and position
correct for each channel. Be careful to avoid any loose
strands that could cause a short between conductors.
In order for these soundbars to perform to their full
potential, we recommend pairing them with a quality
home theater receiver or amplifier. For more information
on installing or wiring the soundbar please see the
installation videos posted online at truaudio.com.
slightly. You should only
adjust the set screw a
maximum of 1/16” (1.5mm),
and should never unscrew
the set screw, as that could
make the soundbar unstable
on the mount.
Wall Mount Block
Set Screw
Color:
Speaker Type:
Tweeter:
Woofer:
Passive Radiator:
Grill Type:
Power:
Sensitivity:
Freq Response:
Impedance:
Finish Dims:
Black
Low Profile Custom Length
LCR Soundbar
(3) 1” Titanium
(3) 4.5” Carbon Fiber
(3) 4.5” Carbon Fiber
Cloth/Aluminum
100W per channel RMS
89 dB
60Hz to 22kHz
8 ohm
6.14” (156mm) H,
2.44” (62mm) D,
81.88” (2080mm) to 62.00”
(1575mm) L Customizable
SB-CUSTOM-LC
Black
Low Profile Custom Length
LCR Soundbar
(3) 1” Titanium
(3) 4.5” Carbon Fiber
(3) 4.5” Carbon Fiber
Cloth/Aluminum
100W per channel RMS
89 dB
60Hz to 22kHz
8 ohm
6.14” (156mm) H,
2.44” (62mm) D,
61.97” (1574mm) to 41.42”
(1052mm) L Customizable
SB-CUSTOM-SC
Color:
Speaker Type:
Tweeter:
Woofer:
Passive Radiator:
Grill Type:
Power:
Sensitivity:
Freq Response:
Impedance:
Finish Dims:
Black
Low Profile Custom Length
LCR Soundbar
(3) 1” Silk Soft Dome
(3) 4.5” Injected Polypropylene
(3) 4.5” Injected Polypropylene
Cloth/Aluminum
100W per channel RMS
88 dB
80Hz to 20kHz
8 ohm
6.14” (156mm) H,
2.44” (62mm) D,
81.88” (2080mm) to 62.00”
(1575mm) L Customizable
SB-CUSTOM-LP
Black
Low Profile Custom Length
LCR Soundbar
(3) 1” Silk Soft Dome
(3) 4.5” Injected Polypropylene
(3) 4.5” Injected Polypropylene
Cloth/Aluminum
100W per channel RMS
88 dB
80Hz to 20kHz
8 ohm
6.14” (156mm) H,
2.44” (62mm) D,
61.97” (1574mm) to 41.42”
(1052mm) L Customizable
SB-CUSTOM-SP
Specifications
SoundVision Technologies dba TRUAUDIO
SPEAKER PRODUCT WARRANTY
All in-ceiling, in-wall, in-room speakers and volume controls have a limited lifetime warranty. This warranty includes lifetime parts
and repair labor on all components. The warranty extends only to the original purchaser of the product and not to any subsequent
owner. TRUAUDIO’s obligation under these warranties is limited to repairing or replacing any component found defective in
material or workmanship under normal conditions of use with an equal and/or current product. These warranties shall not apply to
products which have been abused, modified, or disassembled. Products to be repaired or returned under this warranty must be
returned to the factory through an authorized TruAudio dealer with all transportation and insurance charges prepaid.
