Stud Gun Setup
TWE17000 Gun Setup
Each stud welding application requires that the stud gun be set up properly for the correct stud
and ferrule arrangement.
Select the correct style and size of chuck and attach it to the stud gun
Select the appropriate length leg assembly, foot piece, and ferrule grip
Secure ferrule grip to the foot piece
Tighten leg screws and washers to the foot piece and slide the legs through the front cap
nuts
After the accessories have been mounted to the stud gun place a stud into the chuck and begin
the alignment of the accessories.
Fully seat a stud into the chuck so that the stud is held firmly
Insert a ferrule into the ferrule grip
Move the leg, foot and ferrule assembly so that the stud protrudes beyond the ferrule
1/8” stick out for studs 1/2" and smaller in diameter
3/16” stick out for studs 5/8” through 7/8” in diameter
1/4” stick out for studs 1” to 1
-
1/4” in diameter
Position the ferrule grip assembly so that the stud moves freely through the ferrule when lift is
simulated
10
