TW4300 Cable Connection
Ground Cable Connections
The TW4300 is equipped with one ground cable connection located at the
bottom left on the front of the machine below the power switch
Tighten the ground cable to machine by rotating the connector clockwise and
then secure the C
-
clamp to the work surface
Weld Cable Connections
The TW4300 has one weld and control cable connection on the front of the
welder labeled gun and control
Tighten the weld cable to the machine by rotating the connector clockwise
Plug the male control cable connector to the female panel mount labeled control
13
Weld cable connection
Control cable connection
Ground connection
