Tru-Turf RS48-11D, Manual

Page: 16 / 48

TRU-TURF RS48-11D USA Roll ‘n’ Spike & RS48-11DB Golf Greens Roller Manual 13
Maintenance
• If bearings are faulty
(a) Remove the complete smoothing head from the
machine, undo the four swivel mount bolts on
upper body and steering rod, wheel the roller away
until the total head is exposed to work on.
(b) Remove roller shaft bolts from end plates, remove
rollers from the heads.
(c) Fit new bearings, replace rollers into the heads,
lubricate shaft bolts with an anti seize compound
before installing them. Tighten securely and ensure
rollers rotate freely when fully tightened.
or
If the rollers are a sealed type remove the roller and
replace with a complete new roller.
(d) If the rods are removed or lengths altered ensure
they are correctly adjusted so that the three heads
are parallel to each other when in the straight
ahead position. Adjust if necessary.
Changing engine oil
• Change oil and service as per the manufacturers
Servicing Schedule enclosed as a separate insert to
this manual.
Description Pre-Delivery Pre-Operating 12 Monthly
Check Engine oil
√ √
Check Transmission Oil Level
√ √
Beware of contaminants entering the transmission
√ √
Lubricate drive chain with WD40 or equivalent √ √
Check Tires Max 18 P.S.I. √ √
Check Gas
√ √
Check Smoothing Roller Bearing
√ √
Check Drive Roller Bearings √ √
Check for loose Nuts and Bolts √ √
Renew Engine Oil as per manufacturers Handbook
Renew Transmission Oil - See page 1 for correct oil every 500hrs or... √
Renew Transmission Oil Filter * √
Renew Smoothing Roller Bearings
* √
Renew Drive Roller Bearings
* √
Renew Chain Tensioner Sprocket Bearings * √
Renew Drive Chain * √
Replace Foot Pedal Struts
*
Replace Trailer Strut
*
Changing transmission oil
Ongoing Maintenance, Lubricant and Replacement
Schedule (below)
Note. Areas indicated with a * need to be changed
when defective or as required. This may be before the
recommended replacement schedule. Please replace all
parts as necessary.
Maintenance