12
www.truturf.com
RE50 Owners Manual
Ensure steering joystick has no looseness.
Check that foot pedal depresses under normal
foot pressure.
Ensure that the draw bar locking catch
mechanism is securely locked to the main draw
bar and the safety pin is
fi
tted when trailing the
roller.
Check and tighten grub screws
fi
tted to the end
bearing lock rings on the rubber coated drive
roller and the spiker shaft bearings (if
fi
tted) &
pivot bearings on each smoothing head.
Grease lightly bearings
fi
tted to drive roller,
spiker shaft (if
fi
tted) and Smoothing Head pivot
bearings. Replace plastic caps if missing.
Oil rod ends, sparingly.
Check tire pressure for proper operating
pressure (18-24psi). Do not over in
fl
ate.
Pre-Operation Check List
