Tru-Turf R50-11, Owner'S Manual

Page: 13 / 70

11 www.turturf.com R50-11 Owners Manual
This prevents the operator from being injured.
When the roller is resting on the ground push the
trailer arms back gently, (do not use excessive force)
until the trailer arms will travel no further.
The dampener strut is designed to hold the trailer
arms back behind the operator with the wheels
off the ground. The trailer arms will remain in this
position whilst rolling the greens.
Step 8: Replace engine oil
• A tag is placed on the engine’s On/Off switch
indicating you must fill the machine with oil prior
to operation. Low oil level will cause the engine
to stop on steep hills, the engine cut off safety
switch is designed this way to protect the engine
from damage if low in oil.
• The oil in the engine upon delivery (if not pre-
delivered) is to prevent the inside of the engine
from corroding, replace it with the correct engine
oil, as per the manufacturers specifications.
Step 9: Transmission oil tank breather.
• Unscrew the plastic plug if fitted from the top
of the tank and replace it with the anti-splash
breather supplied. Seal damage and oil leakage
will occur if the breather is not installed. If this is
not done damage to the seals in the transmission
will occur.
Step 10: Lubricate smoothing head pivot bearings.
• There is a grease nipple or zirk located on both
smoothing head centre ball joint swivels. Apply
grease to lubricate fittings.
• When rolling of the green is completed, move the
roller onto the fringe, stop the engine, lock the
trailer into the towing position, connect it to the
towing vehicle then move off to the next green to
be rolled.
ASSEMBLY PROCEDURE